Our full epoxy installation turns bare concrete into a seamless, high-performance floor. We start with diamond grinding to open the surface, repair cracks and test for moisture, then apply a penetrating primer, a thick base coat and your chosen color, flake or metallic finish. A clear protective top coat seals everything in. The result is a glossy, easy-to-clean floor that resists stains, chemicals and hot tire pickup, built for Los Angeles garages, homes, showrooms and busy commercial spaces.
Epoxy Floor Replacement
When an old coating is peeling, bubbling or stained beyond repair, a full replacement is the best long-term fix. We remove the failed epoxy, paint or sealer down to clean concrete using industrial grinders with dust collection. Once the slab is exposed, we correct the problems that caused the original failure, such as moisture or poor bonding. Then we install a brand-new system with premium materials, giving you a fresh, durable floor that is built correctly from the ground up.
Epoxy Floor Repair
Chips, gouges, worn traffic lanes and small peeling spots don't always mean you need a new floor. Our repair service targets the damaged areas, grinding away loose material and feathering the edges so the patch blends in. We fill the damage with high-strength epoxy, match the color or flake pattern as closely as possible and seal it with a fresh top coat. Fast, affordable repairs stop small problems from spreading and add years of life to your floor.
Epoxy Floor Resurfacing
Resurfacing gives a dull, scratched or outdated epoxy floor a completely new look without the cost of full removal. We deep clean and lightly sand the existing coating to create a strong bond, fix any damaged areas, then apply a new color coat, flake broadcast or clear top coat. It's an ideal option for floors that are still well bonded but look tired. Most resurfacing projects are finished quickly, bringing back that bright, like-new shine at a lower price.
Epoxy Floor Restoration
Our restoration service brings older and heavily used floors back to life. We assess the entire surface, remove embedded grime, oil and tire marks, and repair cracks, chips and worn areas. Depending on the condition, we recoat damaged sections or apply a new wear layer across the floor for a uniform finish. Restoration is popular with warehouses, auto shops and commercial facilities that want to extend the life of their floors, improve safety and make a better impression on customers.
Epoxy Floor Coating
Epoxy coatings protect concrete from moisture, oil, chemicals and everyday wear while making it brighter and easier to clean. We offer solid-color coatings, clear sealers and high-build systems in gloss, satin or matte finishes, with optional anti-slip texture. Our low-VOC products are safe for homes and workplaces. Whether you need a simple, budget-friendly garage coating or a heavy-duty finish for a commercial kitchen or workshop, we'll match the coating to how your space is actually used.
Refinishing restores the gloss and protection of an epoxy floor that has become scuffed, faded or hazy over time. We clean the surface thoroughly, sand it to remove fine scratches and dull spots, and apply a new high-performance top coat, often polyurethane or polyaspartic for extra UV and abrasion resistance. You keep your existing color and design while gaining a harder, shinier surface. Refinishing every few years is one of the easiest ways to protect your investment and keep floors looking new.
Existing Floor Preparation
Many floors have old tile, carpet glue, paint or vinyl that must come off before epoxy can be installed. We remove existing floor coverings and adhesives, scrape and grind away residue, and clean the concrete so nothing interferes with bonding. We also check for high spots, low areas and moisture problems. Proper preparation is the most important step in any epoxy project, and our careful process gives your new floor the solid, clean foundation it needs to last for many years.
Epoxy only performs as well as the concrete underneath it. We use professional diamond grinders to remove the weak top layer, sealers and contaminants, creating a rough profile the coating can grip. Our equipment includes HEPA dust extraction, keeping your home or business cleaner during the work. Grinding also levels minor imperfections and exposes hidden damage we can repair before coating. This step prevents peeling and bubbling, and it's included with every epoxy installation we complete in Los Angeles.
Cracks and damaged joints will show through a new coating and can cause it to fail if they aren't fixed first. We clean out each crack, widen it where needed and fill it with structural epoxy or flexible polyurea filler designed for concrete. Control joints are repaired or honored so the slab can still move naturally. After the repairs cure, we grind them flush with the surrounding surface, leaving a smooth, stable base for a clean, long-lasting epoxy finish.
Eco Epoxy Flooring Los Angeles has been providing high-quality epoxy flooring solutions since 2011. We are a locally trusted, bonded and insured contractor committed to delivering durable, beautiful, and eco-friendly flooring systems for residential, commercial, and industrial spaces. Our experienced team uses premium materials and advanced installation techniques to ensure long-lasting results that enhance the look, value, and functionality of your property. From garages and homes to commercial facilities, we take pride in exceptional craftsmanship, honest service, and customer satisfaction. At Eco Epoxy Flooring Los Angeles, we don't just install floors — we build lasting relationships with our clients.
Prices are estimates only. Your final price depends on floor size, concrete condition, repairs needed and the finish you choose. Every project gets a free on-site estimate and a written quote before work begins.
Epoxy flooring is a coating system made from two parts: a resin and a hardener. When the two are mixed, a chemical reaction begins that turns the liquid into a rigid, plastic-like surface. We apply it over properly prepared concrete, where it soaks into the pores and bonds tightly to the slab. Once cured, it forms a seamless, glossy layer that resists stains, chemicals, impacts and daily wear, while giving your garage, home or business a clean, finished look.
A professionally installed epoxy floor usually lasts 10 to 20 years in a home or garage. Commercial and industrial floors that see forklifts, carts and heavy foot traffic may need a fresh top coat sooner, often every 5 to 10 years. The biggest factors are surface preparation, the quality of the coating and how the floor is cared for. Because we grind the concrete, repair damage and use premium materials, our floors are built to stay durable and attractive for many years.
Yes. We use low-VOC and zero-VOC coating systems that release far fewer fumes than traditional products, making them a safer choice for your family, pets and employees. Once fully cured, epoxy is inert and does not give off odors or chemicals. Its seamless surface also doesn't trap dust, mold or bacteria, which helps keep indoor air cleaner. And because a quality epoxy floor lasts for many years, it reduces the waste and resources that come with replacing flooring over and over.
In most cases, yes. Existing concrete is the ideal base for epoxy, as long as it is sound and properly prepared. We start by inspecting the slab and testing it for moisture, then diamond-grind the surface to open the pores and remove old sealers, paint or contaminants. Cracks, chips and uneven joints are repaired before any coating goes down. This preparation is what allows the epoxy to bond permanently instead of peeling, bubbling or lifting over time.
A typical two-car garage takes one to three days from start to finish. The first day usually covers grinding, crack repair and the base coat, followed by flakes or color and a protective top coat. You can normally walk on the floor after 24 hours and park vehicles after about 72 hours, depending on the system and temperature. Larger residential and commercial projects are planned in phases, so we can keep your home or business running with as little downtime as possible.
We install a full range of systems to match your space and style. Options include solid-color epoxy, decorative flake floors, metallic epoxy with a flowing marble look, quartz systems for extra texture, and fast-curing polyaspartic coatings. We also offer concrete sealers and specialty coatings for commercial and industrial settings. During your free estimate, we'll look at how the space is used, your budget and the look you want, then recommend the system that will perform best for your project.
Epoxy floors are easy to care for. Sweep or dust-mop regularly to remove grit that can dull the surface, and clean with warm water and a mild, pH-neutral cleaner as needed. Avoid soap-based cleaners that leave a film, and skip harsh acids or abrasive pads. Wipe up oil, chemicals and spills promptly. Placing mats under kickstands, heavy equipment and in high-traffic entry areas also helps. With this simple routine, your floor will keep its shine for years.
Yes. Crack and joint repair is a standard part of our preparation process. We clean out damaged areas and fill them with epoxy or polyurea repair materials designed to bond with concrete and flex slightly with the slab. Spalled spots, pitting and uneven surfaces are patched and ground smooth before coating. We can also repair existing epoxy floors that have peeled, chipped or worn through, restoring them with a new coating so the finished surface looks clean, even and consistent.
Absolutely. We work with warehouses, auto shops, showrooms, restaurants, retail stores, offices, gyms and industrial facilities throughout Los Angeles. Commercial floors need to handle heavy traffic, equipment and cleaning chemicals, so we select coatings rated for those conditions and can add slip-resistant textures where safety matters. We'll also work around your schedule, including evenings, weekends or phased installations, so your business can keep operating while we upgrade your floors. Every commercial project includes a clear timeline and written scope of work. Learn about commercial epoxy flooring
You can choose from dozens of solid colors, a wide variety of decorative flake blends and striking metallic effects in shades like silver, bronze, blue and charcoal. Finishes range from high gloss to satin and matte, and we can add texture for extra grip. Custom color combinations, logos and borders are also possible for businesses and showrooms. We bring physical samples to your free estimate, so you can see exactly how each option looks in your own space and lighting. See decorative epoxy options or browse all colors & finishes
A smooth, high-gloss epoxy floor can become slippery when it is wet or oily, just like tile or polished concrete. To improve traction, we can add an anti-slip aggregate to the top coat, which creates a fine texture you can barely see but can definitely feel underfoot. Flake systems also naturally provide more grip than plain coatings. For garages, pool areas, kitchens and commercial spaces, we'll recommend the right level of slip resistance for safety without sacrificing appearance.
Yes. Our installations come with a written workmanship warranty, and the coating products we use are backed by their manufacturers. The coverage depends on the system you choose and whether the project is residential or commercial, so we'll explain the exact terms in your written quote before any work begins. We stand behind our preparation and installation process, and if an issue ever comes up with your floor, our team will come back out to inspect it and make it right.
The cost depends on the size of the area, the condition of the concrete, the amount of repair needed and the coating system you choose. A basic solid-color coating costs less than a decorative flake or metallic floor, and larger projects often cost less per square foot. You can use the Cost Estimate form on this page for a quick price range. For an exact price, we'll visit your property, measure the space and give you a detailed written quote at no cost.
We have been installing epoxy floors in Los Angeles since 2011, and we are fully bonded and insured. Our team focuses on proper surface preparation, because that's what makes a floor last. We use premium, eco-friendly, low-VOC materials, give honest recommendations and provide clear written quotes with no surprises. From the first estimate to the final walkthrough, we communicate clearly, show up on time and treat your home or business with care. That's why more than 10,000 local clients trust us.
Yes, every estimate is free and comes with no obligation. We'll visit your home or business anywhere in Los Angeles and the surrounding areas, inspect and measure your floor, check the condition of the concrete and talk through your goals. We'll show you color and finish samples, recommend the best system for your space and then provide a detailed written quote. To schedule yours, call us at (424) 567-0868 or use the Book a Service form on this page.
